Fetal HC/AC Ratio Calculator

Divide the head circumference (HC) by the abdominal circumference (AC), using two measurements from the same scan in the same unit. With HC 300 mm and AC 280 mm, the HC/AC ratio is 300 ÷ 280 = 1.071. The ratio has no unit because the millimeters cancel out.

Arithmetic only. The ratio is not compared with any reference chart and does not say whether growth is normal.

HC/AC ratio

Enter HC and AC from same scan

What are HC and AC? Head circumference is the distance around the baby's head, measured on a cross-section at a set level of the brain. Abdominal circumference is the distance around the belly at the level of the stomach and liver. Both are routine ultrasound measurements from the second trimester onward. Why use same scan? The baby grows between scans, so an HC from one date and an AC from another describe two different moments and their ratio has no meaning. The calculator asks you to confirm both came from the same examination.

Calculate ratio

How do I calculate the HC to AC ratio from an ultrasound report? Find HC and AC on the report, make sure they are in the same unit, then divide HC by AC. A result above 1 means the head measurement is larger than the abdominal measurement; below 1 means the abdomen is larger. The calculator shows four decimal places in the working and three in the headline.

Match units

Why must the circumference units match? A ratio only cancels units when both numbers share them. Dividing 300 mm by 28 cm without converting gives 10.7—a meaningless number. The calculator converts both values to millimeters first (1 cm = 10 mm, 1 in = 25.4 mm) and shows the converted values when the units differ.

Different scenario: mixed units on one report

HC 30.0 cm and AC 280 mm. Converting HC gives 300 mm, so the ratio is still 300 ÷ 280 = 1.071.

Worked example

Worked example

HC 300 mm and AC 280 mm from the same scan. 300 ÷ 280 = 1.0714, shown as 1.071. The sketch draws two circles whose sizes are in the same proportion as the measurements, so you can see the head circle is slightly larger.

To compare two other lengths, the fetal FL/AC ratio calculator divides femur length by abdominal circumference, and the fetal measurement unit converter handles single values.

Why ratios do not independently diagnose growth problems

Does ratio alone show growth issues? No. How the head and abdomen compare changes as pregnancy progresses, so any ratio has to be read against the gestational age, a validated reference chart chosen by the clinician, the individual measurements and their percentiles, the estimated fetal weight, amniotic fluid and often blood-flow studies—and usually against earlier scans too. This calculator uses none of those, which is why it gives a number and no verdict. If a report mentions growth concerns, the clinician who requested the scan is the right person to explain what it means for you. The ultrasound scan interval calculator shows how far apart your scans were.

Sources and method notes

  1. Ultrasound Exams (patient FAQ) — American College of Obstetricians and Gynecologists (ACOG). Fetal measurements taken during a pregnancy ultrasound and why they are interpreted by the care team.