Contraction Timer

Time your contractions

Ready 0:00 Tap the button when a contraction starts.

Your rule for calling

Set to 5-1-1 to start with. If your midwife or doctor gave you different numbers, enter theirs.

The timer keeps your log in this browser's local storage on this device, so it survives a refresh or a locked screen. It does not send the log anywhere. Clear log deletes it.

How to use the timer

  1. Tap Contraction started as soon as you feel the tightening begin. The button turns plum and the clock counts up.
  2. Tap Contraction ended when it fades. Between contractions the big clock shows how long you have been resting since that contraction ended.
  3. Keep going for about an hour. The verdict only appears once you have timed as long as your rule asks for (60 minutes for 5-1-1).
  4. Stopped for a while? After 30 minutes with no contraction the next tap starts a new session. Earlier sessions stay in the log but no longer decide the result or trigger current warnings.
  5. Pressed by mistake? Taps under 3 seconds are ignored, “Discard this one” drops the contraction you are timing, and each row in the log can be deleted.
  6. When you call, use Copy log and read the times out or paste them into a message.

A partner can do the tapping while you breathe through each contraction. The page does not need to stay in front: the times come from the clock on your phone, so locking the screen or switching apps does not lose anything.

What the numbers mean

Three measurements describe a contraction pattern, and the one people most often get wrong is frequency.

MeasureFromTo
Length (duration)start of a contractionend of the same contraction
Frequency (apart)start of a contractionstart of the next contraction
Restend of a contractionstart of the next contraction

So contractions that last a minute with four minutes of rest in between are five minutes apart, not four. This is the standard way to measure it, and it is what midwives will ask you for.

A worked example

Four contractions timed one morning:

#StartedEndedLastedApartRest
110:00:0010:00:450:45––
210:06:3010:07:250:556:305:45
310:12:1010:13:101:005:404:45
410:17:0010:18:051:054:503:50

On average they are 5:40 apart (17 minutes from the first start to the last start, divided by three gaps) and 0:56 long (3 minutes 45 seconds of contractions divided by four). They are getting longer and closer together, which is what labor does, but only 17 minutes have been timed. Under the 5-1-1 rule the timer would say to keep timing.

Checked examples

We ran these through the timer before publishing. Each uses the 5-1-1 rule.

What was timedAverages shownWhat the timer says
The four contractions above (17 minutes)5:40 apart, 0:56 longKeep timing: 60 minutes needed
15 contractions from 9:00 to 10:03, every 4:30, each 65 seconds4:30 apart, 1:05 longMatches the 5-1-1 rule: call now
11 contractions from 9:00 to 10:00, every 6:00, each 50 seconds6:00 apart, 0:50 longNot yet: further apart than 5 minutes and shorter than 60 seconds
15 contractions over 62 minutes, 4 minutes apart except one 10-minute gap, each 60 seconds4:26 apart, 1:00 long; longest gap 10:00Fits on average, but not steady: cannot confirm the pattern, keep timing
A full 5-1-1 hour, then a 2-hour break, then 3 new contractionsAverages of the new session onlyNew session: keep timing (the earlier hour no longer counts)
One contraction timed at 2:102:10 longCall now: longer than 2 minutes (NHS)
Six contractions starting 2 minutes apart2:00 apartCall now, shown as soon as the sixth starts: 6 in 10 minutes (NHS)
The same six, looked at 3 hours later with nothing timed sinceSession endedShown as an earlier event, with advice to call if you have not already

When to call: the 5-1-1 rule and other guides

Hospitals and midwives use slightly different rules, and none of them is a medical test. They are a way of deciding when early labor has become regular and strong enough that you should be assessed.

  • NHS (UK). Contact your midwife or maternity unit when you have regular contractions every 5 minutes or more often, or if you think you are in labor or are worried about anything.
  • MedlinePlus (US National Library of Medicine). Call your doctor or midwife for regular, painful contractions every 5 to 10 minutes for 60 minutes, or contractions lasting 60 to 90 seconds.
  • NICHD (US National Institutes of Health). Let your provider know if you have regular contractions every 5 to 10 minutes for an hour.
  • The 5-1-1 rule. A rule of thumb many hospitals give for a first baby: contractions about 5 minutes apart, each lasting about 1 minute, for 1 hour. It is the timer's starting setting because it sits within the guidance above.

Your own care team's instructions come first. Before 37 weeks, do not wait for a pattern: the NHS says to call straight away if you think you might be in labor, and NIH advises contacting a provider about regular, frequent contractions at any point in pregnancy. Not sure exactly how many weeks you are? The gestational age calculator works it out from your last period or an ultrasound date. If you are expecting twins or have a high-risk pregnancy, ask in advance when to call. If you are planning a vaginal birth after a cesarean, ask when they want you in; our VBAC calculator explains the factors that affect the chance of success. If a previous labor was quick or you live far from the hospital, ask whether you should come in sooner. You can set your own numbers in the timer, or tap 4-1-1 if that is what you were told.

Getting ready for the birth? Pack using the hospital bag checklist, share the labor support with the birth support shift planner, and see our other birth preparation tools.

Trust how you feel, too. Call if the pain is more than you can manage at home, something feels wrong, or you are simply unsure. MedlinePlus says to make contact for any other reason if you are unsure what to do.

Real labor or Braxton Hicks?

Practice contractions (Braxton Hicks, or false labor) can be uncomfortable enough to send people to hospital, especially in a first pregnancy. Timing is one of the clearest ways to tell them apart. This comparison follows MedlinePlus and NIH guidance.

Before labor starts, work out how long the trip to the hospital takes at different times of day with the hospital travel time planner. In labor, follow your maternity unit's advice on when to go in.

Braxton HicksLabor
TimingDo not come at regular intervalsRegular, and closer together (about 5 to 10 minutes apart)
LengthTypically short30 to 70 seconds, getting longer
StrengthWeak; typically not painfulStronger and more intense over time; hard to talk or laugh through
When you moveMay stop when you change positionDo not stop, whatever you do
Where you feel themNo clear patternOften reach into the lower back and upper belly

If you are not sure which you are having, change position or walk around for a while, then time for another half hour. Contractions that fade are likely practice ones. If they keep coming, or you are still unsure, call.

How contractions change as labor moves on

NICHD says that for most women, labor begins sometime between week 37 and week 42 of pregnancy. Your due date falls inside that window, so it is a guide rather than a deadline; if you have not worked yours out yet, the due date calculator gives it from your last period.

The first stage of labor has two parts, and contractions look different in each.

Early (latent) labor

The cervix softens and starts to open. The NHS describes contractions here as anything from mildly uncomfortable to quite painful, with no set pattern to how often they come or how long they last, and says this phase can take many hours or even days. Once contractions settle into a pattern, MedlinePlus describes them as coming about every 5 to 10 minutes and lasting 30 to 70 seconds, getting longer. Most people spend this phase at home.

Active (established) labor

The NHS describes established labor as starting when the cervix has opened to about 4 cm and contractions are stronger and more regular. NIH describes contractions over time becoming stronger, longer and more frequent. A timer cannot tell you how open your cervix is; only an examination can.

The NHS puts the time from the start of established labor to full dilation at usually 8 to 18 hours for a first baby and around 5 to 12 hours for a second or third. The latent phase before that is usually the longest part and can take many hours or even days.

Early labor at home

NHS advice for the latent phase is practical: eat and drink to keep your energy up, rest or sleep if labor starts at night, and stay upright and gently active if it starts during the day. You do not need to time every contraction for hours. Time for an hour, put the phone down, and time again when they feel different.

When you are seen, the midwife or doctor may examine your cervix. If an induction is being discussed, the Bishop score calculator shows how clinicians score how ready the cervix is.

What a timer cannot tell you

  • How strong contractions are. Strength matters as much as timing. Contractions you have to stop and breathe through are different from ones you can talk through, even at the same spacing.
  • What your cervix is doing. Only an examination shows how far labor has progressed.
  • Whether the baby is well. Less movement than usual, bleeding or your waters breaking are reasons to call whatever the timer says.
  • Exact times. Taps are a second or two late at either end, and the start and end of a contraction are hard to pin down. Treat the averages as approximate.

Questions people ask

How do you time contractions?

Note the time each contraction starts and the time it ends. Its length is the time from start to end. How far apart contractions are (the frequency) is measured from the start of one contraction to the start of the next, not from the end of one to the start of the next. Time them for about an hour before deciding what the pattern is: NIH guidance is to let your provider know about regular contractions every 5 to 10 minutes for an hour.

What is the 5-1-1 rule?

It is a rule of thumb many hospitals give for a first baby: contractions about 5 minutes apart, each lasting about 1 minute, for 1 hour. It tells you when to call or come in, not whether labor has started. Government guidance is broader: the NHS says to contact your midwife when contractions come every 5 minutes or more often, and MedlinePlus says to call for regular, painful contractions every 5 to 10 minutes for 60 minutes. If your midwife or doctor gave you a rule, use theirs.

When should I go to the hospital with my second baby?

Later labors are often quicker. The NHS gives around 5 to 12 hours of established labor for a second or third baby, against 8 to 18 hours for a first. Because of that, you may be asked to call earlier than with a first baby. Ask your midwife or doctor before your due date what they want you to do, and set those numbers in the timer.

Can Braxton Hicks contractions be regular?

A few can come in a row, but MedlinePlus describes them as short, not painful and not coming at regular intervals, and NIH notes that false labor contractions are weak or irregular or stop when you change position. Labor contractions keep coming whatever you do and become longer, stronger and closer together. Timing them for an hour is one of the simplest ways to tell the difference.

How long do contractions last in active labor?

MedlinePlus describes labor contractions as lasting 30 to 70 seconds at first and getting longer, and lists contractions lasting 60 to 90 seconds as a reason to contact your provider. In the early (latent) phase the NHS says there is no set pattern.

My waters broke but I have no contractions. Should I wait?

No. NHS advice is to call your midwife or maternity unit straight away if your waters break, whether or not contractions have started. MedlinePlus also lists leaking amniotic fluid as a reason to call.

Do I need to time every contraction for hours?

No. The latent phase can last many hours or even days, so pacing yourself matters. A practical approach is to time for about an hour, then rest, eat and drink, and time again later or when the contractions feel different. If you stop for 30 minutes or more, the timer starts a new session, so an earlier stretch never decides what it says about the current one.

Does this timer save or send my data?

The timer keeps your log in this browser's local storage on this device, so it survives a page refresh or a locked screen. The timer does not send the log anywhere. Clear log deletes it, and clearing your browser's site data for this website removes it too.

How the timer works out the result

Each contraction is stored as a start time and an end time from your device clock. Length is end minus start; frequency is the time between one start and the next; rest is the time between one end and the next start. A contraction ended within 3 seconds of starting is treated as a double tap and not saved.

Sessions. A rest of 30 minutes or more between two contractions starts a new timing session, and so does coming back after 30 minutes with nothing timed. Only the current session is used for the result. Earlier sessions stay in the log under their own heading.

The stretch checked. The timer looks at the length of timing your rule asks for (60 minutes for 5-1-1), counted back from the start of the latest contraction, beginning with the most recent contraction that started at least that long before it. Average frequency is the time from that contraction's start to the latest start, divided by the number of gaps; average length is the mean length of those contractions.

Matching the rule. Averages alone can hide an interrupted pattern, so the timer asks for four things: the average gap is no more than your “minutes apart”; the average length is at least your “seconds”; no single gap in the stretch is more than one minute over your “minutes apart” (6 minutes for 5-1-1); and no single contraction is more than 15 seconds under your “seconds” (45 seconds for 5-1-1). If the averages pass but a gap or a contraction does not, the timer says the pattern is not steady and names the entry. Until enough time has been covered, it shows the averages so far.

Warnings. Separately, the timer flags any contraction longer than 2 minutes and any six contractions whose starts fall within 10 minutes, because NHS advice is to call immediately for either. The six-in-ten check also counts the start of the contraction you are timing, so the warning appears the moment the sixth one starts; if that contraction is discarded or was a double tap, the warning goes away with it. A warning from the last 15 minutes is shown as new; an older one in a session that is still running is shown with its time; one from a session that has ended is shown as an earlier event. In every case the advice is the same: if you have not already spoken to your midwife or maternity unit about it, call them.

Precision. Every comparison uses the exact times in milliseconds. Times are shown to the nearest second, except where that would look like the limit itself: then a tenth of a second is added, rounded away from the limit (for example 2:00.1 for a contraction just over 2 minutes).

Sources

  1. NHS. Signs that labour has begun. www.nhs.uk
  2. NHS. The stages of labour and birth. www.nhs.uk
  3. MedlinePlus Medical Encyclopedia, U.S. National Library of Medicine (NIH). Am I in labor? medlineplus.gov
  4. Eunice Kennedy Shriver National Institute of Child Health and Human Development (NIH). When does labor usually start? www.nichd.nih.gov

This timer is for information and does not replace advice from your midwife, doctor or hospital. It cannot diagnose labor or tell you when it is safe to stay at home. If you are worried about yourself or your baby, call your maternity unit or emergency services.